If you’ve had hearing aids fitted before and nobody ever placed a small probe inside your ear canal alongside the device, there’s a good chance an important step was skipped. Real ear measurement is one of the most valuable tests in modern audiology, and also one of the least talked about outside the profession itself. Here’s what it actually is, how it works, and why it matters more than most people realise.

What real ear measurement actually is

Real ear measurement, sometimes called probe microphone measurement, is a way of checking exactly what sound is reaching your eardrum once a hearing aid is fitted and switched on. A thin, soft tube with a tiny microphone at its tip is placed in the ear canal, positioned close to the eardrum but not touching it, alongside the hearing aid itself. While a series of test sounds play through a speaker, the probe measures the actual sound pressure arriving at that specific point in your ear, in real time.

This is different to how a hearing aid is typically programmed without this step, which relies on your audiogram and a manufacturer’s fitting formula to estimate what settings should work for someone with your particular hearing loss. That estimate is based on average ear shapes and average behaviour. Real ear measurement replaces the average with your actual ear.

Why the difference between average and actual matters so much

Ear canals vary more than people expect, in length, in width, in shape, and in how they resonate. Two people with identical audiograms can need meaningfully different hearing aid settings simply because their ear canals behave differently acoustically. A setting that’s calculated to be correct on average might be too loud, too quiet, or wrong across certain frequencies for one particular person, even though the underlying calculation was done correctly.

Without real ear measurement, this mismatch can go completely unnoticed. The hearing aid will still turn on, still amplify sound, and will often feel like it’s working, at least in a quiet consulting room. The problem tends to surface later, in more demanding situations. Speech that sounds fine one to one becomes harder to follow in a busy kitchen or a crowded café. Certain voices seem clear while others seem muffled. The overall impression is that the hearing aid is “alright, but not amazing,” without anyone being able to pin down exactly why.

What actually happens during the test

The process itself is straightforward from the patient’s side. The tiny probe tube is inserted gently into the ear canal, which takes moments and shouldn’t be uncomfortable. The hearing aid is fitted in the same ear, positioned as it normally would be for everyday wear. A series of calibrated sounds, usually including speech-like signals rather than simple tones, are then played from a loudspeaker positioned in front of you.

As these sounds play, the probe measures precisely what’s reaching your eardrum, and this is compared against a target curve, the theoretical ideal for your specific hearing loss based on validated prescriptive formulas. Where the actual measurement doesn’t match the target, adjustments are made to the hearing aid’s settings, and the test is repeated until the measured output lines up properly with what your ear canal specifically needs. It typically adds ten to twenty minutes to a fitting appointment, sometimes longer if several adjustments are needed to get things right.

Why some places skip it

If it’s this useful, it’s fair to ask why real ear measurement isn’t universal practice. The honest answer is a mixture of time, equipment cost, and training. The equipment itself represents a genuine investment, appointments take longer when it’s included, and not every dispenser has been trained to carry it out confidently. Skipping the step lets an appointment move faster and lets a fitting look, on paper, indistinguishable from one that included it. The difference only becomes apparent afterwards, in how well the hearing aid actually performs in daily life, which is much harder for a patient to trace back to a missed test during fitting.

There’s also a perception issue. Because the test happens quietly in the background of a fitting appointment, patients rarely know to ask for it, and its absence doesn’t announce itself the way a rushed or unfriendly appointment would. It’s entirely possible to have a lovely, unhurried fitting appointment that still skips a genuinely important clinical step.

What good practice looks like

Real ear measurement should really be considered standard for every hearing aid fitting, not an upgrade or an optional extra reserved for complex cases. Professional bodies and most current fitting guidelines treat it as best practice precisely because the alternative, fitting to a generic formula alone, leaves real, measurable gaps between what’s intended and what’s actually delivered. A clinic that carries it out as routine is making a clear statement about how seriously they take getting the fitting right the first time, rather than sending you away to “get used to it” and hoping the settings happen to suit you.

It’s also worth knowing that real ear measurement isn’t just useful at the initial fitting. It’s equally valuable when adjusting an existing hearing aid, when hearing changes over time, or when troubleshooting a hearing aid that doesn’t seem to be performing as well as it should, since it gives an objective, measurable answer rather than relying purely on subjective impression.

What real ear measurement can catch that other checks miss

A standard hearing test tells you about your hearing sensitivity, and a check with the hearing aid switched on in a quiet room tells you it’s making sound louder. Neither of these directly confirms that the specific frequencies you struggle with most are actually being boosted by the right amount for your ear. Real ear measurement can reveal, for example, that a hearing aid is providing plenty of amplification in the mid frequencies but falling short exactly where speech clarity depends on it, in the higher frequencies that carry consonant sounds. This is precisely the kind of gap that explains why someone can technically “hear” more with hearing aids on, while still struggling to follow conversation clearly, particularly in noisier settings.

It can also flag the opposite problem, a setting that’s actually too strong in certain frequencies, which can make sound feel harsh, tinny, or simply too much, especially for someone new to wearing hearing aids. Both problems are difficult to identify from how a fitting feels alone, because everyone’s baseline for “normal” sound is different, and adjusting purely from subjective feedback in the room can easily overcorrect in one direction or another.

What to ask if you’ve had aids fitted before

If you’ve worn hearing aids for a while and never had this test, it’s entirely reasonable to ask your current provider whether real ear measurement was used, and if not, whether it could be carried out now. Many people are surprised at the difference it makes even with hearing aids they’ve already been wearing for months or years, once the settings are properly matched to their actual ear rather than an estimate.

What we do at Hearing Aid Solutions

We carry out real ear measurement as standard for every client at every one of our four clinics, in Carmarthen, Cardiff, Llanelli and Haverfordwest, whether it’s a first fitting or an adjustment to aids you’ve had for some time. It’s not an add-on we charge extra for or reserve for complicated cases. We think it should simply be part of doing the job properly, every time. Contact us to book an appointment!

FAQ

Does real ear measurement hurt?
No. The probe tube is thin, soft, and positioned gently in the ear canal. Most patients don’t find it uncomfortable, and it’s removed as soon as the measurements are complete.

How much longer does a fitting take with real ear measurement included?
Usually an extra ten to twenty minutes, depending on how many adjustments are needed to match the measured output to the target for your hearing loss.

Can real ear measurement be done on hearing aids I already own?
Yes. It’s just as useful for checking and adjusting existing hearing aids as it is for a new fitting, particularly if something has never felt quite right.

Why didn’t my previous audiologist mention this test?
Not every provider carries it out, often due to time, equipment cost, or training. Its absence isn’t always mentioned, since a fitting can appear complete without it.

Is real ear measurement only necessary for complex hearing loss?
No. It’s valuable for any hearing loss, because ear canal shape and acoustics vary between individuals regardless of how straightforward the hearing loss itself is.

Will real ear measurement definitely fix problems with my hearing aids?
It significantly improves the accuracy of the fitting, but it can’t correct for an unsuitable hearing aid choice or an untreated separate issue. It’s one important part of getting the fitting right, not a guarantee on its own.

Join our newsletter.

Get exclusive discounts & useful hearing care info!

Having trouble with your hearing?